Epson Adjustment Program Epson Tx720wd -
Download File > https://blltly.com/2tBb0y
How to Reset Epson TX720WD Printer with Adjustment Program
If you have an Epson TX720WD printer that is showing errors such as "Service required" or "Ink pad is at the end of its service life", you may need to reset it using an adjustment program. An adjustment program is a software tool that can reset the internal counters of your printer and restore its functionality. Here are the steps to reset your Epson TX720WD printer with an adjustment program:
Download the adjustment program for Epson TX720WD from this link [^1^] or this link [^2^]. You may need to enter a password to extract the file.
Run the adjustment program as administrator and select your printer model and port.
Click on "Particular adjustment mode" and select "Waste ink pad counter" from the list.
Click on "Check" to see the current values of the counters. Then click on "Initialization" to reset them to zero.
Turn off your printer and wait for a few seconds. Then turn it on again and check if the error message is gone.
Congratulations! You have successfully reset your Epson TX720WD printer with an adjustment program. You can now use your printer normally. However, keep in mind that resetting the counters does not solve the problem of the waste ink pads. The waste ink pads are sponge-like components that absorb the excess ink during printing and cleaning cycles. Over time, they may become saturated and leak ink, causing damage to your printer and the environment. Therefore, it is recommended that you replace the waste ink pads or install an external waste ink tank to avoid future problems. You can find more information about how to do this in the service manual [^3^] of your printer.
If you want to replace the waste ink pad on your Epson TX720WD printer, you'll need to follow these steps:
Check your printer's waste ink pad. The waste ink pad is located at the bottom of the printer, under a plastic cover. You'll need to remove the cover and some screws to access the pad. You can check your printer's user manual or the service manual [^3^] for more details.
Clean the waste pad area. Before replacing the waste ink pad, you should clean the area around it with a damp cloth or paper towel. Be careful not to spill any ink on your printer or yourself. You may want to wear gloves to protect your hands.
Replace the waste ink pad. To replace the waste ink pad, you'll need to use pliers to pull out the old pad and set it aside. Then, you'll need to insert a new waste ink pad into the slot. You can buy a replacement waste ink pad online or from an Epson authorized service center.
Reset the waste ink counter. After replacing the waste ink pad, you'll need to reset the waste ink counter on your printer. This will clear the "waste ink pad full" error message and allow you to use your printer normally. To reset the waste ink counter, you'll need to download an adjustment program for Epson TX720WD from this link [^1^] or this link [^2^]. You may need to enter a password to extract the file. Then, you'll need to run the adjustment program as administrator and select your printer model and port. Next, you'll need to click on "Particular adjustment mode" and select "Waste ink pad counter" from the list. Then, you'll need to click on "Check" to see the current values of the counters. Finally, you'll need to click on "Initialization" to reset them to zero.
By following these steps, you should be able to replace and reset the waste ink pad on your Epson TX720WD printer. However, if you encounter any difficulties or have any questions, you should contact Epson customer support for assistance. 061ffe29dd